Skip to content

Dishwasher Not Cleaning Properly? Try These Solutions

If your dishwasher is not cleaning properly, there are several troubleshooting steps you can try to resolve the issue. Here are some solutions to consider:

  1. Check and clean the spray arms: The spray arms are responsible for distributing water throughout the dishwasher to clean the dishes. If they are clogged or blocked, it can result in poor cleaning. Remove the spray arms and clean them thoroughly with a soft brush or toothpick to clear any debris.
  2. Inspect the filter: A dirty or clogged filter can hinder proper water flow, leading to ineffective cleaning. Remove the filter according to your dishwasher’s manual and clean it under running water. If it’s damaged, consider replacing it.
  3. Verify water temperature: Check if your dishwasher is getting hot water. Insufficient water temperature can lead to inadequate cleaning. The water should ideally be around 120°F (49°C) for optimal cleaning performance.
  4. Load dishes properly: Improperly loaded dishes can block water spray and prevent effective cleaning. Make sure the dishes are not stacked too closely and that nothing is obstructing the spray arms.
  5. Use the right detergent: Ensure you are using the right dishwasher detergent and following the manufacturer’s recommendations. Low-quality or expired detergents can impact cleaning results.
  6. Run the hot water before starting the dishwasher: Before starting the dishwasher, run the kitchen faucet on hot until the water is hot. This helps ensure the dishwasher begins its cycle with hot water.
  7. Inspect the water inlet valve: The water inlet valve controls the water flow into the dishwasher. If it’s faulty or clogged, it can lead to poor cleaning. Check the valve for any issues and replace it if necessary.
  8. Clean the interior: Occasionally, the interior of the dishwasher can accumulate debris or limescale. Use a dishwasher-safe cleaner or a mixture of vinegar and baking soda to clean the interior.
  9. Check the spray arm holes: Ensure that the holes on the spray arms are not blocked. Use a pin or a toothpick to clear any clogs.
  10. Run a vinegar cycle: Running a cycle with a cup of white vinegar placed in the top rack can help remove any buildup or limescale from the dishwasher.

If you have tried these solutions and your dishwasher is still not cleaning properly, it may be a sign of a more significant issue. In that case, it’s best to contact a professional appliance repair service for further diagnosis and assistance.

Leave a Reply

Your email address will not be published. Required fields are marked *