Skip to content

Dishwasher Not Cleaning Properly? Try These Solutions

If your dishwasher is not cleaning properly, there are several troubleshooting steps you can try to resolve the issue. Here are some solutions to consider:

  1. Check and clean the spray arms: The spray arms are responsible for distributing water throughout the dishwasher to clean the dishes. If they are clogged or blocked, it can result in poor cleaning. Remove the spray arms and clean them thoroughly with a soft brush or toothpick to clear any debris.
  2. Inspect the filter: A dirty or clogged filter can hinder proper water flow, leading to ineffective cleaning. Remove the filter according to your dishwasher’s manual and clean it under running water. If it’s damaged, consider replacing it.
  3. Verify water temperature: Check if your dishwasher is getting hot water. Insufficient water temperature can lead to inadequate cleaning. The water should ideally be around 120°F (49°C) for optimal cleaning performance.
  4. Load dishes properly: Improperly loaded dishes can block water spray and prevent effective cleaning. Make sure the dishes are not stacked too closely and that nothing is obstructing the spray arms.
  5. Use the right detergent: Ensure you are using the right dishwasher detergent and following the manufacturer’s recommendations. Low-quality or expired detergents can impact cleaning results.
  6. Run the hot water before starting the dishwasher: Before starting the dishwasher, run the kitchen faucet on hot until the water is hot. This helps ensure the dishwasher begins its cycle with hot water.
  7. Inspect the water inlet valve: The water inlet valve controls the water flow into the dishwasher. If it’s faulty or clogged, it can lead to poor cleaning. Check the valve for any issues and replace it if necessary.
  8. Clean the interior: Occasionally, the interior of the dishwasher can accumulate debris or limescale. Use a dishwasher-safe cleaner or a mixture of vinegar and baking soda to clean the interior.
  9. Check the spray arm holes: Ensure that the holes on the spray arms are not blocked. Use a pin or a toothpick to clear any clogs.
  10. Run a vinegar cycle: Running a cycle with a cup of white vinegar placed in the top rack can help remove any buildup or limescale from the dishwasher.

If you have tried these solutions and your dishwasher is still not cleaning properly, it may be a sign of a more significant issue. In that case, it’s best to contact a professional appliance repair service for further diagnosis and assistance.…

The Ultimate Guide to Troubleshooting Your Refrigerator

We rely on our refrigerators to keep our food fresh and our drinks cold. However, like any other appliance, refrigerators can sometimes encounter problems. The good news is that many of these issues can be resolved with a little troubleshooting. In this guide, we’ll walk you through some common refrigerator problems and provide you with practical solutions to get your fridge up and running again. So, let’s dive in!

  1. The Fridge Isn’t Cooling Properly:

One of the most common issues people face with their refrigerators is improper cooling. If you notice that your food isn’t staying as cold as it should, there are a few things you can check:

  • Check the temperature settings: Ensure that the temperature control is set correctly. It’s typically recommended to keep the fridge temperature between 34-40°F (1-4°C).
  • Clean the condenser coils: Dust and debris can accumulate on the condenser coils, hindering their ability to cool the refrigerator. Locate the coils (usually at the back or underneath the fridge) and clean them using a vacuum cleaner or a brush.
  • Check the door seals: Faulty door seals can lead to warm air seeping into the refrigerator. Inspect the seals for any cracks or gaps and replace them if necessary.
  1. The Freezer Isn’t Freezing:

If your freezer isn’t maintaining the desired freezing temperature, follow these steps:

  • Check the thermostat setting: Ensure that the freezer’s temperature control is set to the recommended freezing temperature, usually around 0°F (-18°C).
  • Clear blocked vents: Obstructed air vents can disrupt the circulation of cold air. Make sure the vents inside the freezer and around it are clear from any food items or ice buildup.
  • Defrost the freezer: Ice buildup can occur over time and affect the freezer’s cooling efficiency. If you notice excessive frost, manually defrost the freezer by unplugging it and letting the ice melt. Once defrosted, clean up any water and plug it back in.
  1. Water Leakage:

Discovering water pooling around or inside your fridge can be frustrating. Here’s what you can do to address this issue:

  • Check the water supply line: If your refrigerator has an ice maker or water dispenser, inspect the water supply line for leaks or loose connections. Tighten any loose fittings or replace damaged lines.
  • Clear clogged drain tubes: Refrigerators have drain tubes that remove condensation. If these tubes become clogged with debris, water can accumulate and cause leakage. Gently clear any obstructions using a pipe cleaner or warm water.
  1. Unusual Noises:

Unusual noises coming from your refrigerator can be bothersome. Here’s how you can troubleshoot them:

  • Level the fridge: A refrigerator that isn’t leveled properly can produce rattling or vibrating sounds. Use a leveling tool to adjust the fridge’s feet until it stands evenly on the ground.
  • Check the condenser fan: A faulty condenser fan can cause grinding or squeaking noises. Inspect the fan located at the back of the fridge and replace it if necessary.


By following the troubleshooting steps outlined in this guide, you’ll be well-equipped to address common refrigerator problems and avoid unnecessary expenses. Remember to refer to your appliance’s manual for specific instructions and safety precautions. If the troubleshooting steps don’t resolve the issue, it’s advisable to consult a professional technician to prevent further damage. A properly functioning refrigerator ensures your food stays fresh and your beverages stay cool, keeping your kitchen running smoothly.…

When to Call a Professional for Appliance Repair

  • by

Modern appliances are designed to make our lives easier and more efficient. Whether it’s a washing machine, refrigerator, oven range or dishwasher, they all help us save time and energy on household chores. But when these appliances break down, we quickly find ourselves struggling to complete tasks that used to be simple. This is why it’s important to know when you should call an appliance repair professional for assistance like our friends at RR Appliance Services.

When it comes to identifying when an appliance needs repair, there are some tell-tale signs. These include unusual noises coming from the appliance, lack of water pressure or heat for washing machines and dishwashers, food not staying cold in the refrigerator and ovens not heating correctly. If you begin to notice any of these issues, it’s important to call a professional as soon as possible. Failing to do so can cause further damage and result in more expensive problems down the line.

If you’re looking for an appliance repair technician, it’s important to ensure they are reputable and experienced. It is recommended that you look at company reviews online or ask friends and family for recommendations. Ask questions such as how long they have been in business, what types of services they offer, if they are licensed and insured and if their technicians are certified. This will help narrow down your choices and make sure you find the best person for the job.

When it comes time to pick an appliance repair service provider, there are many benefits of doing so. Firstly, they are professionals who have the knowledge and expertise to diagnose and repair any issue quickly and accurately. They also use top-of-the-line tools and parts that ensure your appliance is repaired correctly the first time around. Furthermore, opting for a professional will help save you money in the long run as it avoids any costly mistakes or repairs that you may attempt yourself if inexperienced.

At the end of the day, having a reliable source for appliance repair services can be invaluable when an appliance breaks down. Knowing when to call an expert for assistance can save you time and energy, whilst making sure your appliances remain in optimal condition. With this article we hope you feel empowered to make informed decisions when it comes to selecting an appliance repair professional.

It is important to remember that preventative maintenance can also help keep your appliances running smoothly and for longer. By taking the time to clean and inspect them regularly, you can catch small issues before they turn into major problems. Additionally, replace any worn or damaged parts, such as door seals or hoses, to ensure your appliance is operating at its best. With a bit of everyday care, you’ll be able to maintain your appliances in good condition and avoid costly repairs down the line.

By following these tips and keeping an eye out for any problems with your appliances, you’re sure to have a reliable source of convenience and efficiency long into the future! Appliances play an integral role in our daily lives, and having a professional on hand to help with maintenance or repair can be invaluable. With the right knowledge and reliable repair services, you’ll be able to ensure your appliances remain in optimal condition for years to come.

Good luck!